Updated 2/14/96
Click on the inline images to obtain the larger images.
Test Bench Pictures
Refer to XC05 Drawing E445700, in particular sheets 5 and 9. Sheet 5 shows plate descriptions.
(JPG 165K)
Reach and access to bench jack wheel.
(JPG 66K)
Reach and access to bench jack wheel.
(JPG 66K)
Wheel, raills, walkway, & patch panel below walkway. West side of DETB. Patch panel is probably inboard of port AA.
(JPG 66K)
Top of bench, a -13 plate. Note large through-holes in addition to .250-20 pattern. Top left corner of -15 plate is visible. Note that HRMA foot comes down in the upper left area of the -13 plate.
(JPG 50K)
Similar view. Better contrast on -13 hole pattern.
(JPG 50K)
-13 again.
(JPG 50K)
-13 again. Dim view of -15 plate.
(JPG 50K)
Side of bench showing interior structure. -15 plate on right.
(JPG 50K)
Closeup of interior structure. Note that some holes in hole pattern are limited in depth by interior supports.
(JPG 50K)
-13 plate hole pattern. Note large hole in foreground for jack clearance.
(JPG 50K)
-13 pattern again, showing gap in pattern
(JPG 50K)
-13 again.
(JPG 66K)
Bird's eye view of -13. Good shot of large & small hole pattern.
(JPG 50K)
Another aerial shot of -13.
(JPG 66K)
-13 and a -11 from above.
(JPG 66K)
Nice shot of the end of the SETB, showing the -15 plate.
(JPG 50K)
Bench side again, lower aspect.
(JPG 66K)
Underside of bench top.
(JPG 50K)
More interior structure.
(JPG 50K)
Access to jack wheel again.
(JPG 66K)
Work on bench top. View of -13, -15, -16.
(JPG 50K)
Work on bench top. View of -13, -15.
(JPG 66K)
Good image of -15.
(JPG 66K)
Limited view of -13 and -15.
Back to the main picture page.