XPA supports host-based access control for each XPA access point. You can enable/disable access control using the XPA_ACL environment variable. You can specify access to specific XPA access points for specific machines using the XPA_DEFACL and XPA_ACLFILE environment variables. By default, an XPA access point is accessible only to processes running on the same machine (same as X Windows).
When INET sockets are in use (the default, as specified by the XPA_METHOD environment variable), XPA supports a host-based access control mechanism for individual access points. This mean that access can be specified for get, set, or info operations for each access point on a machine by machine basis. For LOCAL sockets, access is restricted (by definition) to the host machine.
XPA access control is enabled by default, but can be turned off by setting the XPA_ACL environment variable to false. In this case, any process can access any XPA server.
Assuming that access control is turned on, the ACL for an individual XPA access point is set up when that access point is registered (although it can be changed later on; see below). This can be done in one of two ways: Firstly, the XPA_ACLFILE environment variable can defined to point to a file of access controls for individual access points. The format of this file is:
class:name ip aclThe first argument is a template that specifies the class:name of the access point covered by this ACL. See XPA Access Points and Templates for more information about xpa templates.
The second argument is the IP address (in human-readable format) of the machine which is being given access. This argument can be * to match all IP addresses. It also can be $host to match the IP address of the current host.
The third argument is a string combination of s, g, or i to allow xpaset, xpaget, or xpainfo access respectively. The ACL argument can be + to give sgi access or it can be - to turn off all access.
*:xpa1 somehost sg *:xpa1 myhost + * * gwill allow processes on the machine somehost to make xpaget and xpaset calls, allow processes on myhost to make any call, and allow all other hosts to make xpaget (but not xpaset) calls. Secondly, if the XPA_ACLFILE does not exist, then a single default value for all access points can be specified using the XPA_DEFACL environment variable. The default value for this variable is:
#define XPA_DEFACL "*:* $host +"meaning that all access points are fully accessible to all processes on the current host. Thus, in the absence of any ACL environment variables, processes on the current host have full access to all access points created on that host. This parallels the X11 xhost mechanism.
Access to an individual XPA access point can be changed using the -acl parameter for that access point. For example:
xpaset -p xpa1 -acl "somehost -"will turn off all access control for somehost to the xpa1 access point, while:
xpaset -p XPA:xpa1 -acl "beberly gs"will give beberly xpaget and xpaset access to the access point whose class is XPA and whose name is xpa1.
Similarly, the current ACL for a given access point can be retrieved using:
xpaget xpa1 -aclOf course, you must have xpaget access to this XPA access point to retrieve its ACL.
Note that the XPA access points registered in the xpans program also behave according to the ACL rules. That is, you cannot use xpaget to view the access points registered with xpans unless you have the proper ACL.
Note also when a client request is made to an XPA server, the access control is checked when the initial connection is established. This access in effect at this time remains in effect so long as the client connection is maintained, regardless of whether the access fro that XPA is changed later on.
We recognize that host-based access control is only relatively secure and will consider more stringent security (e.g., private key) in the future if the community requires such support.
Go to XPA Help Index