Table 1: Calibration Instrument Requirements Summary

Table 3: Initial Measurements: Alignment and Focus
Test Name, Description and Accuracy Requirement ( 1 )	Justification	Off-axis angles	Focal Plane Included Angles (radius)	T, °C	Energy Sampling Interval (E)	Data Acquisition Time Estimate	Detector
1. 1.1 X-ray Alignment & Focus Measure the alignment of P_nH_n. Do hsialign, then beamcen, mcaalign. Accuracy: 0.1 arcsec.	Data needed for verification of HRMA acceptance, and for on-orbit model calculations	0	0.010 mm diam. pinhole	70 2.5 F	Al-K	hsialign(100)+beamcen(5 )+mcaalign(9,9,10): {268+4x100+127+6x5+235+14x9+[9x9x(97+20)] = 10,663 sec} x 4 mirrors = 11.8 hr	HSI
1.2 2-D scan 19 x 19, beamcen, mcascan	Verification of general image quality	0	0.010 mm diam. pinhole	70 2.5 F	Al-K	beamcen(5)+ mcascan(19,19,10): 127+6x5+215+14x19+19x19x(22+10) = 12190 sec = 3.4 hr	Pinhole Scanner
1.3 Total Data AcquisitionTime for Initial Measurements						15.2 hr