The High Resolution Camera (HRC) Flight Hardware and Ground
Support Equipment (GSE) - Prior to Delivery to MSFC
- UV/Ion Shield on test fixture
- Winding of Crossed Grid Charge Detector (CGCD) for
HRC-I
- Shutter blade
- Vacuum cart pumping unit
- Alignment of the vacuum housing
- Fe55 radioactive calibration source
- HRC-S EM
- The HRC-S EM in the Vacuum Test Chamber
- HRC spacecraft power filter
- HRC lifting fixture
- UV/Ion Shield Design and Focal Plane Layout
- Transmission Test of UVIS witness sample
- Mockup of Focal Plane Instrumentation
- Assembly of the HRC-S Fiducial Lights
- Mockup of UV Stray Light Baffle
- Vacuum Housing
- Electronic Boxes
- Imaging Detector Fiducial Light Assembly
- Calibration Source Assembly
- Environmental Test Model Suppression Filter Assembly
- Spectroscopy Detector CGCD
- Spectroscopy Detector MCP Assembly
- Spectroscopy Detector UVIS Assembly
- Electronic Boards under Test
- Electronic Boards under Test
- Vacuum Interface Cluster and Vacuum Housing
- Testing of the HRC Door Mechanism
- HRC Ground Test Pulser
- FM Vacuum Housing, Bipods, and Electronics Boxes
(10/96)
- MCP bias angle measurement
- G. Austin and S. Murray assembling the FM HRC-I
- Dr. S. Murray installing the FM HRC-I subassembly into the Calibration
Chamber
- FM HRC-I subassembly
- Horst Gigerenzer with the HRC-S substrate (aka "dogbone")
- Ralph Kraft installing the BND in the test chamber
- Calibration Chamber and Friends (K. Kobayashi, R. Kraft, G.
Meehan)
- Esso Flyckt of Philips Photonics, Brive, France
- Shielding for testing the FM Electronics
- Focal plane fit check (11/23/96)
- Proud Fathers - J. Polizotti, G. Austin, D. Weaver (11/23/96)
- Calibration source mounted in door (12/6/96)
- Vacuum housing with door (12/6/96)
- Potting Power Supplies (1/4/97)
- Front End Electronics Assembly (FEA)
- Central Electronics Assembly (CEA) Backplane
- Central Electronics Assembly (CEA) Base
- Lab Electronics for Schaeffer Actuator Tests
- Testing the Flight Electronics
- Vacuum Test of the Flight Vacuum Housing
- HRC Mounted to Vacuum Housing Bottom Plate
- HRC Vacuum Housing Installation in Test Chamber
- Testing the CTUE/RCTU (2/8/97 at SAO)
- Thermal Test of the FM Electronics
- HRC FM HVPS
- HRC-I, -S, and Suppression Filter inside Vacuum Housing
- Assembling the FM HRC
- Formal Testing of the HRC
- Packing the HRC and Departure for MSFC
